Slice Machine
The diagram and the principle work
The Slice Machine is the principle works to beg for motor will
be using the gearwheel carries to
turn the connection stays with the floating
axle. It will go to turn knife dish gives it can work while we turn the
gearwheel carries . We still set up the dynamo to keeps it for spin the
electric current and take electric current
variable builds [ wasp ] with the
board . A variable will send the electric
current appeareds to open the stump
makes straight for.
when invent finished already bring it to test
slicing a banana and measure electric
energy saving
Step doing
1.We study the state of the
community about side earning a living problem within the
community
2. We design the Slice Machine
3. procure all of equipments to use in doing invention
4. We cut the background iron
for doing the structure long 70
centimetres
4 amounts
are heel
long 40 centimetres
10 amounts
are heel
5. Combine in the structure seeks at the middle
point of top iron and range finding from
the middle
point goes out beside vacate 5
centimetres
and spot then to perforate
6. Paint iron structure with spray for protect
rust.
7. lead the floating axle comes to the thin
bamboo-stripes enters 1 beside already lead 8 inch
sizes ,
add suit the floating axle.
8.
lead
the platform lathes infront flat come to lay directly a hole that pierces to
keep
already a bowl
crowdedly
9. transmitting size inch
belts
10. Range finding from the
beam gets down 16 centimetres , already combine in 1 box
size inch
iron , for the platform supports
11. cut table student old leg has that can't use
already for bring build [ wasp ] 4 both of legs
12. cut 30 box
long centimetre irons , combine the conclusion and has finished structure
already lead bicycle dynamo
come to combine with the iron box that reserve
13. wire the electric line
from the dynamo comes to that feel numb , already build [ wasp ]
suit open the stump makes
straight for , lead electric connection line stays with open the
stump makes straight for
to build [ wasp ] suit a light bulb
14. cut
smooth tinplate , wide 40 centimetres , long 45 centimetres , 3 amounts
for close
the side blow blue with
15. Lead the tinplate that prepare that reserve
to come to 1 to
cut to the opening wide
20 centimetres long
30 centimetres for the opening add the gearwheel carries
16. stick the tinplate that reserve with the
structure
17.
set up the dynamo and build [ wasp ] the
dynamo suit greedy electricity compiler for
send electricity hand
down , battery
18.
check
that the dynamo can to produce the
electric current and the electricity can keep
the
battery or not by using an ammeter and ask keep the stump
19. set up the small stump size hill . The power
comes to suit the floating axle and build
[ wasp ] with fire switch
20. check see that or not are small stump hill and fire switch
can can work
21. check all part that good strong , already check work efficiency .
